This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Nerve stimulator (TENS) device
The Thermoskin TENS represents an innovative advancement in wireless electrical nerve stimulation devices. It enhances the technology found in conventional TENS machines, offering a more portable, efficient, and user-friendly design.
- Wireless and portable design
- Integrated design, functional operation, simple and easy to use.
- Rechargeable lithium design, with built-in power protection circuit.
- 16 level strength can be adjusted, according to personal preferences.
- Secure electrode patch detection and protection.
- The TENS machine operates in 15-minute cycles with an automatic shut-off and can be restarted as needed.
1. Before You Start
- Charge the device using the provided USB cable before first use.
- Attach the electrode pads to the device by aligning and snapping the metal buckles into place.
- Remove the protective film from the gel pads.
- Apply the device directly onto clean, dry skin in the desired treatment area.
2. Powering On
- To turn the device on, press and hold the power button (⏻) until you hear a beep.
- The device will start in Mode 1 with intensity set to level 0 (no stimulation).
- To turn it off, press and hold the same button again.
3. Adjusting Intensity
- Press the “+” button to increase stimulation intensity.
- Press the “–” button to decrease intensity.
- There are 16 intensity levels (0–16). Increase gradually to find the most comfortable level.
- The device detects when the pads are properly attached to the skin and adjusts accordingly.
4. Selecting a Mode
- The device has 3 therapy modes.
- Short press the mode button (⚙) to switch between them.
- Each time you change modes, the intensity will reset to level 1 for your safety.
5. Automatic or Manual Shutdown
- Each treatment session lasts 15 minutes and will automatically shut off afterward.
- If left idle for 30 seconds, the device will shut down to save power.
- You can also manually turn off the device at any time by pressing and holding the power button.
6. Charging the Device
- If the device won’t power on, shuts off unexpectedly, or emits a warning beep for 30 seconds, it likely needs recharging.
- Charge the device using the provided USB cable.
- If the battery indicator flashes, recharge before use.
- Always fully charge the device before first use or after prolonged storage (1 month+).
- Do not use or charge the device in environments over 45°C, as this may affect battery life.
Need more help?
For more information, please refer to the manual inside the packaging.

Health Insurance Rebates
Did you know that most private health insurance rebates are available on TENS Machines if they are used for therapeutic benefits?
READ MORE
Nerve Stimulator (TENS) Device
Unsure which product is right for you?
Searching through the endless options can be confusing. Let us recommend the best product for your need.
LETS GO